- height 77 cm
- width 72 cm
- depth 67 cm
- seat height 37 cm
- arm height 61 cm
lead time 6 – 8 weeks
The sawhorse was a theme Wegner was fond of using in both his table- and chair production. But it must also have been a concept quite native to him, since it is so readily associated with woodworking. Among his sawhorse furniture, CH29, simply called the Sawhorse Chair, turned out to have the greatest impact and achieved the status of a classic.
Ref: Hans J. Wegner. A Nordic Design Icon from Tønder. Edited by Anne Blond.
Wegner had designed the dining room chair, CH23, in 1950 for Carl Hansen & Son, along with its matching easy chair, CH28. The Sawhorse Easychair, too, made up half of a dining and easychair duo. This easy chair version of the Sawhorse, designed in 1951, was given product number CH28 and went into production the same year. The dining room chair was also designed in 1951, but only went into production the following year, after a thorough testing procedure. As part of a photo portrait series from December 1951 in the newspaper, Politiken, there is a picture of the Wegner’s housemaid sitting in the Sawhorse Chair. The text reads: ‘By the time Hans J. Wegner sends a chair out into the world, he has tested it thoroughly and for a long time.’ This is a clear example of the fact that Wegner’s chairs were not just supposed to function well on paper, but also in practice. Both variants of the Sawhorse Chair were produced with a bare plywood seat as well as an upholstered one. The Sawhorse Chair bore a strong likeness to – and was a clear forerunner of – both the Folding Chair and the fixed version of Politiken’s canteen chair that Wegner designed in the 1980s with a seat that came in a variety of colours.
When it was introduced, the press praised the chair with words like ‘triumph’ and ‘the admirably designed, light dining room chair’. In addition to the qualities mentioned in the press, it pleased Wegner how comfortable the chair was, plus the fact that it was light enough to be handled easily by a housewife. A fascinating aspect of the Sawhorse chairs is the simplicity of their design with very few components: front and rear legs, two seat supports, seat and a back, nor stretchers or side rails. Instead the construction is held in place stabilised by the seat that appears to hover elegantly over the two supports where the crossbars and legs meet. A point where the dimensions are particularly weighty.
The front legs taper toward both top and bottom, while the rear legs, which are really only half supporting legs, taper only downward since they need their thickness for strengthening the point where they join the front legs. In other words, Wegner made a point of reducing the amount of wood and chair parts while maintaining great sitting comfort. The Sawhorse Chair was not designed for the Cabinetmaker Guild exhibitions, but for Carl Hansen & Son. This meant Wegner had to model the chair in a way that suited a production procedure to a greater degree than he otherwise would have. Thus the simple lines and reduction of the number of components served as an optimal design solution for this modern piece of furniture.